Quick answer: to clean a patio in Northeast Ohio, sweep it, apply a cleaner that kills algae and mildew, let it dwell, agitate stubborn spots and rinse with controlled pressure. Concrete tolerates more pressure than pavers, stone or stamped finishes, so match the method to the surface. Most patios need cleaning once a year, shaded ones more often.
A patio should be the place you relax, not the place you slip on green slime. In our climate, humid summers, long wet springs and freeze and thaw cycles turn patios into a perfect habitat for algae and moss. Here is how to get yours clean without damaging it.
Why patios turn green and black
- Shade and moisture. Trees, fences and house walls keep the surface damp for days after rain.
- Organic debris. Leaves, pollen and seed pods break down and feed algae and mildew.
- Porous surface. Concrete and pavers hold water in tiny pores where growth takes hold.
- Poor drainage. Patios that slope toward the house or do not drain stay wet longer.
Green and black growth is more than cosmetic. It is slippery when wet, which matters around steps, grills and pool areas.
Know your surface first
| Surface | Care notes |
|---|---|
| Plain concrete | Most durable, handles moderate pressure with a surface cleaner |
| Pavers | Joint sand can wash out with high pressure, so use controlled settings |
| Natural stone | Can etch or stain, use stone-safe products |
| Stamped concrete | Coating and color can wear, avoid harsh chemicals and high pressure |
| Brick | Mortar joints can erode, use lower pressure |
If you are not sure what you have, test a small hidden spot first.
Step-by-step patio cleaning
- Clear the area. Move furniture, planters and grills. Sweep away leaves and loose dirt.
- Pre-wet nearby plants. Soak shrubs and lawn edges so any runoff is diluted.
- Apply cleaner. Use a cleaner suited to the surface that targets algae and mildew. Work in sections so it does not dry.
- Let it dwell. Give the product 10 to 15 minutes to break down growth.
- Agitate. Scrub stubborn areas with a stiff brush, and use a surface cleaner attachment if you have a pressure washer. It cleans evenly and avoids wand streaks.
- Rinse thoroughly. Rinse from the highest point to the lowest and keep the nozzle moving.
- Let it dry. Wait for a full dry before sealing or placing furniture back.
Pressure washer tips
- Use a wide fan tip, not a pinpoint nozzle
- Keep the nozzle moving and a consistent distance from the surface
- Avoid blasting joint sand out of pavers
- Never point a pressure washer at doors, windows or electrical outlets
High pressure can leave lines and etched marks in concrete and gouge softer stone. Control matters more than power.
Stains you may find
- Rust: orange spots from metal furniture or planters need rust-specific treatment
- Oil and grease: grill drips need a degreaser, see how to remove oil stains from concrete
- Leaf tannins: brown stains from fallen leaves often lift with cleaner and scrubbing
- Efflorescence: white chalky salt residue from moisture moving through the surface
When to seal a patio
Sealing after cleaning can slow water absorption and make the next cleaning easier. The surface must be completely dry and the weather mild. Not every patio needs a sealer, and some finishes should not be sealed, so check manufacturer advice.
How often should you clean it?
- Sunny, open patios: once a year
- Shaded or tree-covered patios: every spring and sometimes again in fall
- Patios near water or heavy foliage: twice a year
Sweep regularly to keep leaves from sitting on the surface.
When to hire a professional
Call a pro if the patio is large, heavily stained, made of delicate stone or pavers, or if you do not want to risk damaging it. Professional cleaning evens out the finish and removes stains that DIY products miss. Our concrete cleaning starts at $0.23 per square foot, so a 300 square foot patio starts around $69 plus the 5% transaction fee. Sealing and deep stains are quoted after we see the surface.
Frequently Asked Questions
What is the best way to remove moss from a patio?
Apply a cleaner made for moss and algae, let it dwell, brush stubborn areas and rinse. Keep pressure moderate so you do not damage the surface.
Is it safe to pressure wash pavers?
Yes with care. Use lower pressure and a wide tip, and replace joint sand afterward if it washes out.
Will vinegar kill algae on a patio?
It may lighten light growth but is not reliable on thick algae or moss, and it can harm some stone. Use products made for the surface.
How do I stop algae from coming back?
Improve sun and airflow, sweep often, fix drainage and consider sealing after cleaning.
Can you clean my patio and deck together?
Yes. Bundle any 2 services and we include free exterior window cleaning.
Related reading
- Paver Patio Cleaning, Polymeric Sand and Sealing: What Ohio Homeowners Should Know
- Pressure Washing a Driveway Before Sealing: Why Prep Decides How Long the Sealer Lasts
- How to Clean a Wood Deck in Northeast Ohio (Without Damaging It)
Get a Free Quote from ALWAYS B.I.G.
Ready to put this to work? Use the instant estimate on our site, book online in a few clicks, or call or text (216) 202-8264. We serve homeowners and businesses across Cleveland and Northeast Ohio.
About the Author
Michael Betts is the founder of ALWAYS B.I.G. Power Washing Pros, an owner-operated exterior cleaning company serving homeowners and businesses across Cleveland and Northeast Ohio with house washing, roof cleaning, gutter services, window cleaning and concrete cleaning.
Call or text (216) 202-8264, email michael@ohiopowerwashingpros.com, or read more homeowner guides in the Curb Appeal Report.

