• 2026 bundle: free window or gutter cleaning
Red brick house exterior with ivy removed and clean mortar lines

Cleaning Brick and Stone Exteriors: Efflorescence, Algae and Stains Without Damaging Mortar

Quick answer: clean brick and stone with low pressure and a cleaner matched to the material, not a blast of high-pressure water. Brick is porous and mortar joints are softer than the brick, so too much pressure can erode the joints, push water inside and strip the surface. Test a small spot first, and call a professional for historic, painted or delicate masonry.

Brick and stone homes are a feature of many Northeast Ohio neighborhoods, from older city streets to newer suburbs. Masonry lasts for generations, but it still needs the right care.

Common stains on brick and stone

  • Algae and mildew. Green, black or gray growth in damp, shaded areas.
  • Efflorescence. White, powdery salts that migrate out of the masonry as moisture evaporates.
  • Rust stains. From metal fixtures, fasteners or iron in the water.
  • Soot and pollution. Gray or black grime near roads or chimneys.
  • Mortar haze. Residue from construction or repair work.
  • Ivy and vine marks. Plants leave residue and can damage mortar.

Why gentle matters

Brick has a hard fired surface, but older brick can be softer and more porous. Mortar is the weak point. High pressure can:

  • Erode mortar joints, which opens paths for water
  • Chip or pit the face of the brick
  • Drive water deep into the wall where it can freeze and cause damage
  • Remove the natural finish and make the brick absorb more water

Water in masonry plus freeze and thaw cycles equals damage. That is a real risk in our climate.

A safe cleaning approach

  1. Inspect the masonry. Look for crumbling mortar, cracks and loose bricks. Repair first if needed.
  2. Test a small hidden area. Check the cleaner and method.
  3. Pre-wet nearby plants and surfaces.
  4. Apply a masonry-safe cleaner. It should match the stain type, such as an algae treatment, an efflorescence remover or a rust remover.
  5. Let it dwell according to directions.
  6. Agitate gently with a soft or medium brush if needed.
  7. Rinse with low pressure from the top down.
  8. Let it dry fully and check the result.

Avoid muriatic acid unless a masonry professional recommends it, because it can damage mortar and brick and cause staining.

Dealing with efflorescence

Efflorescence is salt carried out by water. Dry brushing and a mild cleaner often remove it. If it keeps returning, there is a moisture source, such as leaking gutters, bad flashing or poor drainage. Fix the moisture, or the white powder will come back. See gutter repair vs replacement.

Painted brick and historic masonry

Painted brick needs gentle cleaning so the paint is not stripped. Historic and soft brick are especially vulnerable, and many need specialist methods. Read our guide to soft washing historic homes for how we approach older properties.

Stone exteriors

Different stones react differently. Limestone and sandstone can be damaged by acids and high pressure. Granite is more resistant. Manufactured stone veneer can be damaged by hard blasting and strong chemicals. If you do not know what you have, test first.

How often to clean brick and stone

  • Every 2 to 3 years for typical homes
  • Yearly for shaded walls prone to algae
  • After stains appear, so they do not set

What about sealing?

Sealing is not always recommended, because some sealers can trap moisture inside the wall. Talk to a masonry professional before applying a sealer to brick or stone.

When to hire a pro

Call a professional if you have a historic home, painted or crumbling brick, tall walls or heavy staining. Our house washing uses low pressure and a cleaning solution rather than blasting, and starts at $0.21 per square foot. We recommend a masonry contractor if you need tuckpointing or structural repair.

Frequently Asked Questions

Can you pressure wash brick?

Carefully, at low pressure. High pressure can damage mortar and the brick face and force water into the wall.

How do I remove white powder from brick?

It is likely efflorescence. Dry brushing and a mild cleaner often work, and you should also fix the moisture source.

Is soft washing good for brick?

Yes. It kills algae and mildew with a cleaning solution and uses low-pressure rinsing.

Will cleaning remove ivy damage?

Cleaning can remove residue, but damaged mortar and stains may need repair.

How do I know if my brick is too soft to clean?

If it crumbles, sheds sand or looks chalky, stop and ask a masonry professional.

Get a Free Quote from ALWAYS B.I.G.

Ready to put this to work? Use the instant estimate on our site, book online in a few clicks, or call or text (216) 202-8264. We serve homeowners and businesses across Cleveland and Northeast Ohio.


About the Author

Michael Betts is the founder of ALWAYS B.I.G. Power Washing Pros, an owner-operated exterior cleaning company serving homeowners and businesses across Cleveland and Northeast Ohio with house washing, roof cleaning, gutter services, window cleaning and concrete cleaning.

Call or text (216) 202-8264, email michael@ohiopowerwashingpros.com, or read more homeowner guides in the Curb Appeal Report.

Call Book NowQuote